3 1/2 Hours* From First Coat of FLEXMAR NextGen to Walk-on Return to Service
FLEXMAR Polyaspartic flooring is easy to install. But that's not the most important feature. The key is the time it doesn't take for installation. This time-lapse illustration shows just how quickly your facility will be back in service: 3 1/2 hours.
- 2-Coat Installation
- 3 1/2 Hours Return to Service
- 3-Coat Installation
- 5 Hours Return to Service
- 4-Coat Installation
- 6 1/2 Hours Return to Service
*2-coat system/500 sq ft. installation
Benefits of a Polyaspartic Coating
As little as 5-6 hour application and walk-on return to service.
All season application in 0° - 100° F temperatures.
Manufactured with polyaspartic resin technology, a two-component coating system.
Up to 4 times more durable than epoxy flooring.
Seamless flooring with a tough, hard, pore-free finish that seals the surface.
Colors will not fade or yellow due to age or exposure to sunlight or UV lighting.
Virtually maintenance free! Sweep or wet mop for a like-new finish.
Before and After Transformations
Move the Slider Left to Right to see the Transformation
FLEXMAR NextGen 100% polyaspartic floor coatings can be installed directly over existing tile floors.
Ceramic, porcelain, vinyl and other tiled floor removal expense is eliminated by installing FLEXMAR NextGen directly over the existing floor after preparation.
Learn more about this cost-saving technique as it reduces the time for flooring installation.